Zemismart ZM25RX-08/30

Model ZM25RX-08/30
Vendor Zemismart
Description Tubular motor
Exposes cover (state, position), options, linkquality
Picture Zemismart ZM25RX-08/30



Using either the up or down button, press and release 4 times, then long press and release. There should be a red light blinking to indicate the device is in pairing mode.


How to use device type specific configuration

  • invert_cover: Inverts the cover position, false: open=100,close=0, true: open=0,close=100 (default false). The value must be true or false



The current state of this cover is in the published state under the state property (value is OPEN or CLOSE). To control this cover publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"state": "OPEN"}, {"state": "CLOSE"}, {"state": "STOP"}. It’s not possible to read (/get) this value. To change the position publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"position": VALUE} where VALUE is a number between 0 and 100.

Options (composite)

Can be set by publishing to zigbee2mqtt/FRIENDLY_NAME/set with payload {"options": {"motor_speed": VALUE, "reverse_direction": VALUE}}

  • motor_speed (numeric): Motor speed max value is 255
  • reverse_direction (binary): Reverse the motor direction allowed values: true or false

Linkquality (numeric)

Link quality (signal strength). Value can be found in the published state on the linkquality property. It’s not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 255. The unit of this value is lqi.