TuYa TS0601_switch
| Model | TS0601_switch |
| Vendor | TuYa |
| Description | 1, 2, 3 or 4 gang switch |
| Exposes | switch (state), linkquality |
| Picture |  |
| White-label | Norklmes MKS-CM-W5, Somgoms ZSQB-SMB-ZB, Moes WS-EUB1-ZG, AVATTO ZGB-WS-EU |
Notes
Pairing
Press any button 5 times, after this, click the button one more and hold the button.
Exposes
Switch (l1 endpoint)
The current state of this switch is in the published state under the state_l1 property (value is ON or OFF).
To control this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"state_l1": "ON"}, {"state_l1": "OFF"} or {"state_l1": "TOGGLE"}.
It’s not possible to read (/get) this value.
Switch (l2 endpoint)
The current state of this switch is in the published state under the state_l2 property (value is ON or OFF).
To control this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"state_l2": "ON"}, {"state_l2": "OFF"} or {"state_l2": "TOGGLE"}.
It’s not possible to read (/get) this value.
Switch (l3 endpoint)
The current state of this switch is in the published state under the state_l3 property (value is ON or OFF).
To control this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"state_l3": "ON"}, {"state_l3": "OFF"} or {"state_l3": "TOGGLE"}.
It’s not possible to read (/get) this value.
Switch (l4 endpoint)
The current state of this switch is in the published state under the state_l4 property (value is ON or OFF).
To control this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"state_l4": "ON"}, {"state_l4": "OFF"} or {"state_l4": "TOGGLE"}.
It’s not possible to read (/get) this value.
Linkquality (numeric)
Link quality (signal strength).
Value can be found in the published state on the linkquality property.
It’s not possible to read (/get) or write (/set) this value.
The minimal value is 0 and the maximum value is 255.
The unit of this value is lqi.