Niceboy ORBIS Vibration Sensor
| Model | ORBIS Vibration Sensor |
| Vendor | Niceboy |
| Description | Vibration sensor |
| Exposes | battery, voltage, vibration, sensitivity, linkquality |
| Picture |  |
Options
How to use device type specific configuration
vibration_timeout: Time in seconds after which vibration is cleared after detecting it (default 90 seconds). The value must be a number with a minimum value of0
Exposes
Battery (numeric)
Remaining battery in %, can take up to 24 hours before reported..
Value can be found in the published state on the battery property.
It’s not possible to read (/get) or write (/set) this value.
The minimal value is 0 and the maximum value is 100.
The unit of this value is %.
Voltage (numeric)
Voltage of the battery in millivolts.
Value can be found in the published state on the voltage property.
It’s not possible to read (/get) or write (/set) this value.
The unit of this value is mV.
Vibration (binary)
Indicates whether the device detected vibration.
Value can be found in the published state on the vibration property.
It’s not possible to read (/get) or write (/set) this value.
If value equals true vibration is ON, if false OFF.
Sensitivity (numeric)
Value can be found in the published state on the sensitivity property.
It’s not possible to read (/get) this value.
To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"sensitivity": NEW_VALUE}.
The minimal value is 0 and the maximum value is 50.
Linkquality (numeric)
Link quality (signal strength).
Value can be found in the published state on the linkquality property.
It’s not possible to read (/get) or write (/set) this value.
The minimal value is 0 and the maximum value is 255.
The unit of this value is lqi.