ADEO HR-C99C-Z-C045

   
Model HR-C99C-Z-C045
Vendor ADEO
Description RGB CTT LEXMAN ENKI remote control
Exposes battery, action, linkquality
Picture ADEO HR-C99C-Z-C045

Notes

Pairing

Hold small reset button pressed (located on the backside of remote) for 3 seconds (until the front LED blinks) and device will reset and will attempt to join network.

Actions generated by circular button

It is important to know that click on the center round boutton is the way to switch between color_saturation_step_down and color_temperature_step_up (bottom of the cicrcular button) color_saturation_step_up and color_temperature_step_down (top of the cicrcular button) color_hue_step_down and nothing (left of the cicrcular button) color_hue_step_up and nothing (right of the cicrcular button)

Options

How to use device type specific configuration

  • simulated_brightness: Simulate a brightness value. If this device provides a brightness_move_up or brightness_move_down action it is possible to specify the update interval and delta. The action_brightness_delta indicates the delta for each interval. Example: 
    simulated_brightness:
delta: 20 # delta per interval, default = 20
interval: 200 # interval in milliseconds, default = 200

Exposes

Battery (numeric)

Remaining battery in %, can take up to 24 hours before reported.. Value can be found in the published state on the battery property. It’s not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 100. The unit of this value is %.

Action (enum)

Triggered action (e.g. a button click). Value can be found in the published state on the action property. It’s not possible to read (/get) or write (/set) this value. The possible values are: on, off, scene_1, scene_2, scene_3, scene_4, color_saturation_step_up, color_saturation_step_down, color_stop, color_hue_step_up, color_hue_step_down, color_temperature_step_up, color_temperature_step_down, brightness_step_up, brightness_step_down, brightness_stop.

Linkquality (numeric)

Link quality (signal strength). Value can be found in the published state on the linkquality property. It’s not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 255. The unit of this value is lqi.