Datek HBR2917E
| Model | HBR2917E |
| Vendor | Datek |
| Description | Eva scene selector |
| Exposes | battery, temperature, action, linkquality |
| Picture | ![]() |
Options
How to use device type specific configuration
-
temperature_precision: Number of digits after decimal point for temperature, takes into effect on next report of device. The value must be a number with a minimum value of0and with a with a maximum value of3 -
temperature_calibration: Calibrates the temperature value (absolute offset), takes into effect on next report of device. The value must be a number. -
simulated_brightness: Simulate a brightness value. If this device provides a brightness_move_up or brightness_move_down action it is possible to specify the update interval and delta. The action_brightness_delta indicates the delta for each interval. Example:simulated_brightness: delta: 20 # delta per interval, default = 20 interval: 200 # interval in milliseconds, default = 200
Exposes
Battery (numeric)
Remaining battery in %, can take up to 24 hours before reported..
Value can be found in the published state on the battery property.
It’s not possible to read (/get) or write (/set) this value.
The minimal value is 0 and the maximum value is 100.
The unit of this value is %.
Temperature (numeric)
Measured temperature value.
Value can be found in the published state on the temperature property.
It’s not possible to read (/get) or write (/set) this value.
The unit of this value is °C.
Action (enum)
Triggered action (e.g. a button click).
Value can be found in the published state on the action property.
It’s not possible to read (/get) or write (/set) this value.
The possible values are: recall_1, recall_2, recall_3, recall_4, on, off, brightness_move_down, brightness_move_up, brightness_stop.
Linkquality (numeric)
Link quality (signal strength).
Value can be found in the published state on the linkquality property.
It’s not possible to read (/get) or write (/set) this value.
The minimal value is 0 and the maximum value is 255.
The unit of this value is lqi.
