Waxman 8850100

   
Model 8850100
Vendor Waxman
Description leakSMART automatic water shut-off valve 2.0
Exposes battery, switch (state), linkquality
Picture Waxman 8850100

Notes

Pairing

Press the center button five times, quickly, to reset the device. The blue light should blink every two seconds as a confirmation, then attempt to join a network

Other Models

This integration should work with all manufacturer model numbers for the “leakSMART Automatic Water Shut-off Valve 2.0” but has only been tested with the 8850100:

  • 8850000 - 3/4” Valve
  • 8850100 - 1” Valve
  • 8850200 - 1-1/4” Valve
  • 8850300 - 1-1/2” Valve
  • 8850310 - 2” Valve

Options

How to use device type specific configuration

  • state_action: State actions will also be published as ‘action’ when true (default false). The value must be true or false

Exposes

Battery (numeric)

Remaining battery in %, can take up to 24 hours before reported.. Value can be found in the published state on the battery property. It’s not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 100. The unit of this value is %.

Switch

The current state of this switch is in the published state under the state property (value is ON or OFF). To control this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"state": "ON"}, {"state": "OFF"} or {"state": "TOGGLE"}. To read the current state of this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"state": ""}.

Linkquality (numeric)

Link quality (signal strength). Value can be found in the published state on the linkquality property. It’s not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 255. The unit of this value is lqi.